Browse content Arrow icon

Key Features

Suitable for all bone types and made of Grade IV Titanium, the Cone Morse Screw Standard is the best choice for a long-lasting, quick-fit implant.

Differentials

Switch Platform

Switch Platform

A new concept that decreases bone loss and favors primary Implant stability in the patient.

Biological Chamfer

Biological Chamfer

Ensures better adaptation of the Implant to the patient’s gum.

Speed Surface

Speed Surface

Since 2018 all implants produced by Kopp now have Speed Surface treatment. Developed by Kopp, has proved to be one of the best solutions to optimize bone integration.

Drill Sequence and Measurements

The diameter of the Drill may change depending on the operator's clinical experience.

Ø3.5 Ø3.75 Ø4.0 Ø4.3 Ø5.0
Lança Ícone check Ícone check Ícone check Ícone check Ícone check
2.0 Ícone check Ícone check Ícone check Ícone check Ícone check
2.8 Ícone check Ícone check Ícone check Ícone check Ícone check
3.0 Ícone check Ícone check Ícone check Ícone check Ícone check
3.3 Ícone check Ícone check Ícone check Ícone check
3.8 Ícone check Ícone check
4.3 Ícone check
7.0 mm 8.0 mm 9.0 mm 11.0 mm 13.0 mm 15.0 mm
3.5 mm 140.744 140.745 140.746 140.747 140.748 140.749
3.75 mm 140.750 140.751 140.752 140.753 140.754 140.755
4.0 mm 140.756 140.757 140.758 140.759 140.760 140.761
4.3 mm 140.762 140.763 140.764 140.765 140.766 140.767
5.0 mm 140.768 140.769 - - - -

Prosthetic Options

General Prosthetic Options

Component image
Covers

Made of Polymer or Titanium the Cover has the function of closing and protecting the entrance of the Cone Morse Implant during the bone integration phase.

Component image
Healing

Manufactured in Titanium according to ASTM F 136 standard, the scar is used for gingival profile formation during the healing phase for subsequent assembly of the prosthetic components. It has different transmucosal heights (2.0mm, 4.0mm, 6.0mm and 8.0mm) and two diameters (3.5mm and 4.5mm).

Component image
Analog

It is used as a replica of the Cone Morse implant platform in a plaster model for prosthesis confection and prosthetic planning. It is made of brass or stainless steel.

Component image
Repositional Transfer

It is used to transfer the position and direction of the implant through impression. Used in CLOSED tray. Manufactured with Titanium according to ASTM F 136 standard the Transfer is anti-rotational. After molding the CM transfer is screwed into the CM analog and repositioned in the molding.

Component image
Drag Transfer

Made of titanium according to ASTM F136 Standard, the Drag Transfer is used to transfer the position and direction of the implant through impression. Used in OPEN tray. After molding the CM Transfer is loaded next to the impression material and then screwed into the CM Analog.

Quer ver todos os nossos componentes com especificações técnicas e medidas?

Então baixe nosso catálogo!

Specific Prosthetic Options

Component image
CM Screw Titanium Trunnion

 Straight or Angled (17 ° and 30 °) Made of titanium according to ASTM F 136 standard the Trunnion is used to rehabilitate cemented Morse cone unit prosthesis. It is available in various transmucosal heights and diameters.>

Component image
Ucla CM Anti-Rotational Casting Screw (Titanium)

Low strap and high strap. It is used to rehabilitate screwed unitary prosthesis or Morse cone cemented multiple fixed prosthesis. It can be customizable through wear.

Component image
Ucla CM Screw Anti-Rotation Calcinable (cobalt chrome base)

Low strap and high strap. It is used to rehabilitate screwed unitary prosthesis or Morse cone cemented multiple fixed prosthesis. It can be customizable through closure and casting in prosthetic alloys.

Component image
Mini R CM Screw Abutment (Titanium)

It is an intermediate prosthetic component to rehabilitate single or multiple prosthesis screwed onto 11.5 ° Morse cone implant. Made of titanium alloy according to ASTM F 136, it has different transmucosal heights (0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, and 5.0mm).

Component image
UCLA CM Calcinable Antirrotational (Titanium)

Low strap and high strap. It is used to rehabilitate screwed unitary prosthesis or Morse cone cemented multiple fixed prosthesis. It can be customizable through wear.

Component image
CM Screw Mini Abutment (Titanium)

 Straight or Angled (17 ° and 30 °). Made of titanium according to ASTM F 136, the Mini Abutment is used to rehabilitate multiple fixed screwed morse cone prosthesis. It also features different transmucosal heights (0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm).

Component image
Mini R CM Screw Abutment (Titanium)

It is an intermediate prosthetic component to rehabilitate single or multiple prosthesis screwed onto 11.5 ° Morse cone implant. Made of titanium alloy according to ASTM F 136, it has different transmucosal heights (0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, and 5.0mm).

Component image
Attachment Ball

It is used for retention and stability of removable overdenture prosthesis. Made of titanium according to ASTM F 136 standard, it features prosthetic O`Ring ring platform. Available in different transmucosal heights (1.0mm, 2.0mm, 3.0mm, 4.0mm).

Component image
O`Ring

Used in the removable prosthesis, it has a titanium cocoon made according to ASTM F 136 and an O`Ring * ring inside with nitrile rubber material. * O`Ring ring is sold separately for replacement.